Friday 31 January 2014

Thankyou Eddie!



  Have you ever had a moment of pure coincidence, where you were in the right place at the right time for something great to happen?  I had one a few months ago – it was early May and Jess and I were out celebrating our 2nd wedding anniversary (how time has flown).  We had had an expensive month what with moving house and Jess changing jobs so we didn’t really want to go away for a break.  We decided to just have some nice time off to relax and enjoy each others company.  We had a few outings, one of which included a shopping trip to Manchester.

  Even though i’m a manly man with a manly mans beard, i do enjoy a shopping trip.  And when you get to spend it with your beloved even better (see how i am laying on the affection – although soppy this will earn me darkroom time at a later date).  We wandered round for hours, pottering around the usual shops, enjoying our time together.  When you live in Preston, Manchester is like shopping heaven – which brings me to the focal point of this tale.  Manchester houses the closest analogue camera/darkroom store to where i live, namely the Real Camera Co (yes i am aware Calumet have a store in Manchester also, but it isn’t in the city centre is it).  Whenever i am in the area i make a point to pop in, even if i don’t need anything.  The chance for me to go into such a store is a such a rarity that to pass it up seems foolish.  No amount of googling or apugging can ever make up for seeing cameras in the flesh.  Hasselbalds, Mamiyas, Bronicas, leicas, Graflexes etc  are all lined up ready to be drooled over.  

  They also have a nice little book section to peruse through.  I decided to have a pick through as darkroom books are always a treat to have and you never know, there may be a few hidden gems.  Eventually i stumbled upon a book called Creative Elements by Eddie Ephraums.  I wasn’t familiar with his work but i bought the book anyway as it was on a couple of pounds and it seemed interesting.  Only when i got home and started reading did i realise the magnificence of what i held in my hands!  If you are unfamiliar with this book i recommend you go onto amazon immediately and fork out the paltry sum of £2.04 so that you too can own it.  Unlike other darkroom books Ephraums takes a number of his own images and talks you through what he did from setting up the camera, developing the film and creating the final print.  He includes his dodging and burning charts, and most importantly he reveals his mistakes throughout the process.  

  The best part of this book, however, lies in what Eddie shows us can be done with a "mediocre" negative.  Almost every developed film has at least one frame (be it landscape, portrait or whatever) that is dull, flat and lifeless.  Whilst we usually pass these by in favour of “superior” negatives, Ephraums shows us that these frames should not be so forgotten.  

  Take, for example, the following three frames (sorry about the quality, they are just mobile phone pictures taken straight from the book):



   If i had these shots on a negative, i'd probably play around with them for a while but then end up moving on to something else.  Now look at what Ephraums did with these shots (again, sorry about the quality):



  A complete transformation!  By effective use of dodging & burning, creative choice of paper grade and use of toning & bleaching, Ephraums is able to completely change the look and feel of the image.

  And that is something i hadn't really come across before.  Naturally i had read and seen may examples of dodging and burning etc at work, but i had never considered how they could be used so  extensively in completely changing an image.  Which i guess is where 'art' and 'expression' come into photography.  This revelation led me to look back over my old negatives.  Unfortunately the reason most frames on my old negatives didn't get printed was because of scratches, fingerprints and blemishes on the emulsion.  However, i remembered the roll of film i had recenty shot on a day out with a friend.

  We had gone up to Ribblehead so that i could take some photos and he could paint the majestic viaduct.  The weather was grey and overcast with sunny spells so i didn't hold out much hope for getting any great photos.  But still, it was nice to be out for a day with a close friend.  We took an appropriately oversized picnic, set up our chairs and took in the beautiful scenery.  The moors of the Forest of Bowland and Yorkshire, although quite bleak, are beautiful places which are often overlooked by many in favour of the Lake District.

  Unfortunately the viaduct was very popular with walkers that day so i couldn't get a clear shot.  Also some moron thought it was fine to drive his van down the footpath and park right in front of the viaduct, thus saving himself 5 minutes of walking time.  I didn't really visualise having a bright white van in the foreground of my final print!  On another note, why oh why do people use trekking poles when walking along the flattest and widest footpaths in the world?  The only time you need to use trekking poles are if your walking up a mountain.  And i mean a mountain, not some little hump in the Lake District!  Anyway, i decided to leave Daniel painting and go for an explore of the local area.  I found a few small caverns and limestone pavements, but nothing that i fancied shooting.  I looked to the horizon and saw a distant hill, small and long, with fields in the foreground and some nice clouds in the sky above it.  I thought "what the heck", setup my tripod, composed and exposed.  I only shot two frames that day which felt wrong, but at least i had a good time doing it.

  Fast-forward a week or so and my film is developed and dry (i used up the rest of the roll a few days later on a day out with Jess).  By the way i promise i don't just go out all the time - i do some work too!  Anyway, the film was dry and i did a quick contact sheet.  A few frames looked promising so i stored that information in my head for when i got a chance to print.

  Friday.  Jess is out at a wedding all day and it looks like she's not getting home until late.  That means i've got at least 2 hours after work for some quality me time.  Into the darkroom i go.  I didn't really fancy doing any lith printing and i was in a landscape mood so i reached for the Ribblehead and Bowland negatives.  I decided to give the hill shot a try, even though it looked a bit dull and uninteresting.  Everything was a flat grey and seemed a bit "meh".  I decided to have a quick thumb through Ephraums book to get some inspiration before i cracked on.  A few test strips and proofs and i was in the area with my base exposure.  I did a few more strips for dodging and burning and then tied it all together onto one print. A bit more work required.  A little more dodge, a little more burn and then suddenly a decent-looking print started to appear.  A few sheets later and i had a print i was very happy with indeed.

  I decided to switch from RC to FB paper as i wanted the look FB gets with the sepia-selenium toning i had in mind.  I adjusted my exposure accordingly and compensated for drydown.  A few minutes later i had the print in my hand and it looked good.

  I ran into the kitchen and set the tap running whilst i set up my toning gear.  I previsualised sepia and selenium for the final print so i laid out my trays.  After the wash i slid the print into the bleach for around 8 minutes, pulling it just as the shadows were starting to lose density.  I didn't want to bleach back the whole way because then the selenium would have nothing to work with.  A quick rinse and then into the sepia for a few minutes.  The print turned a lovely sepia tone, better on the FB paper than it would have been on RC.  Once toning was complete i did another wash and then put the print in the selenium.  I used a mix of 1:9 as i only wanted a slight colour shift.  The shadows went a deep brown and the sepia highlights and midtones turned from a yellow to a deeper, richer brown which was exactly what i wanted.

  After leaving the print to dry i was left with exactly what i wanted;

  Compared to the original flat print the final print is so different and i'm really happy with it.

  So what do we learn from this long and winding tale?  Never ignore a seemingly dull or uninteresting negative.  With a little work and dedication you can breathe new life and energy into an image.  Plus, everyone loves seeing a complicated set of dodging and burning plans written down don't they?!  And it feels good to really work at a print and shape it.

  All that is left for me to say is "thankyou Eddie", without your book i may never have unlocked the potential of many of my negatives.

How To: Make a Black & White Print Part II - Making the Print

  I’ve finally gotten around to making this article!  Sorry it’s taken so long, i’ve been having a hectic time lately with going on holiday and a death in the family but now, at last, here’s part two of my black and white printing articles - making the print.

  So, you’ve followed some (if not all) of the advice in Part I and you’ve got together all the gear you need.  Now it’s time to make your print.  Lets start right at the beginning and take our time...

Step 1 – Prepare the chemicals

  You should have three chemicals – developer, stop and fixer (if you’re using fibre paper you should probably have some hypo clearing agent but that’s not overly critical); and you should have three appropriately sized trays.  I say appropriately sized because there’s no point printing 16”x 20” if your trays are only 5”x 7”.  A good rule of thumb is to use a tray one size bigger than the paper you will be printing on, then you will have lots of room to get your tongs in and pull the paper out.

  Lay your trays out side by side on a flat surface and mark then from left to right “dev”, “stop”, and “fix”.  Now it’s time to mix your chemicals (preferably with distilled/deionised water but tap water is ok as long as it isn’t too hard).  Your chemicals should come with mixing instructions so follow these.  For example i use Ilford Multigrade developer which should be mixed 1:9 with water.  Some people struggle with understanding ratios so let me try and shine some light onto the matter.  1:9 means mix 1 part chemical to every 9 parts water (making 10 parts in total).  In an 8”x 10” tray i like to use 600ml, so 600 ÷ 10 (1+9) = 60.  So you need 60 ml of chemical in a 600ml solution.  That’s 60ml developer + 540ml water.  If the ratio was 1:19 (as it is for the stop bath i use) then that would be 30ml chemical + 570ml water.  I hope that makes sense, if not then comment on this article and i’ll try and help you out as best i can.

  Once your developer, stop and fixer solutions are all mixed pour them out into the appropriate trays.  Get three bottles and label them up ready to pour these solutions into once your darkroom session is finished; you can reuse these chemicals for quite a while before exhaustion.  



  One thing i should say is to make sure that your chemicals aren't near your enlarger or where you store your paper.  Spillages can happen easily and you don't want to ruin your paper by splashing it with chemicals.  Most darkrooms have a "dry" side and a "wet" side which are separate from each other.  If you are working in a bedroom its good to put some plastic sheeting down to protect walls and (in my case) a chest of drawers from splashes.  Silver is a hard stain to remove!

Step 2 – Prepare the negative and load the enlarger

  When you’re choosing a negative to make your first print with it is best to choose a well developed negative with good average contrast.  The last thing you want to be doing on your first attempt to print is to try and burn through base fog and be dodging and burning all over the place.  If it helps try scanning a few frames of your film onto your computer and pick the shot that looks best without too many adjustments.  For this tutorial i will be printing this negative which is a picture of my wife on a bike riding through a park.



  Once you have chosen your negative you need to make sure it is as clean as possible.  Use a soft brush to gently wipe both sides of the negative to remove any dust and particles that may be laying on the surface.  Do the same for your enlargers negative holder (it’s good to get into the habit of doing this regularly).  Glass cleaning wipes are handy for this and i keep a small box in my darkroom especially for holder cleaning.

  Now slot the negative into the enlarger holder emulsion side down.  To find the emulsion side hold the negative up to the light – it should be dull.  Alternatively, look for the writing on the negative edges - if it’s the right way up you’re looking at the non-emulsion side.  Align the negative as straight as you can inside the holder to save problems later.


  Load the holder into your enlarger and clamp it (most enlargers have a little handle that keeps the holder in position).  

Step 2 – Setup the image

  Once the negative is all loaded turn off your room light, put on your safelight and start up your enlarger (to operate my enlarger i have a Paterson timer on which i can set the exposure time.  If you are using a colour head make sure all filtration is off.  Open up your lens to let the maximum amount of light through – this makes it easier to focus.  Make sure you are using a lens of appropriate focal length.  A 50mm lens is good for 35mm negatives, and 80mm for 6x6 (see part I of my black & white printing guide).

  Now, the distance from the light source in your head to the base determines the size of the image (as does focal length of your lens i.e. if you use an 80mm lens on a 35mm negative the head height of the enlarger to make an 8”x 10” print will differ from that when using a 50mm lens).  The greater the distance between the two the larger the image.  I am going to be printing 8”x 10” so my head won’t need to be too high up the enlarger column.  Some enlargers have a size scale printed on the column – if yours does then set it to 8” x 10”.  Mine doesn’t so i have to do it the old fashioned way.  I do this by taking my enlarger easel and setting the blades to a few mm under 8”x 8” (my prints are all square as i shoot 6x6 film).  I then place the easel under the enlarger and adjust the height of the head until the image covers the 8”x 8” area created by the intersection of the easel blades.  


  
  Take your focus finder and place it in the centre of the image cast by the enlarger.  Whilst looking through it adjust the fine focus of your enlarger until the grain not the image is in sharp focus.  The grain is a constant in your negative but your image is not – it may be blurred and out of focus so by focusing on the grain we are ensuring that maximum sharpness is achieved.  


  Focusing may well have made the image size to big or small for the print we wish to make so adjust the head height again and focus.  Keep doing this until your image is sharply focused at the right size.  Now lock your head (normally there’s a screw knob that prevents the head from being able to move).  Move your easel around until the image is aligned as you want it.  This is the point at which you can straighten any wonky horizons.  Personally i don’t like to crop my shots but that’s just my ethic, you can do what you like.  Once this is done you should have a nice sharp image which covers your print size and slightly overlaps onto your easel blades.  At this point turn off your enlarger, turn on the room light and we’ll look to the paper.

Step 3 – Choosing paper and setting grade

  Now it’s time to choose your paper.  When you gain a little more experience in printing you will start to see that different papers and finishes suit different types of image.  I have a variety of papers in my darkroom that i have on hand depending on the final print i want to achieve.  As this is your first print just use whatever paper you have managed to get a hold of.  In this example i am using Ilford’s MG IV RC VC (resin coated variable contrast) glossy paper which is a good “industry standard” paper (Kentmere’s VC Select is also a very good and slightly cheaper alternative which i also use).
 
  Once you have settled on a paper it’s time to choose a grade to print at.  Paper grade determines the contrast of your print.  Grade 00 is very flat, low contrast whilst grade 5 is very high contrast.  Most well exposed, well developed negatives with good overall contrast will print nicely at about grade 2.  If your negative is of a low contrast scene then printing at a higher grade will help and vice versa.  Personally i like my prints to be of a slightly higher contrast so i tend to print my well exposed, well developed (hopefully at least) negatives at grade 3.  Of course, your artistic interpretation of the negative can change this "rule".  For example, i recently took a shot of a boat on some very still water.  I wanted the sky and water to be very light and the boat to be a dark value almost black.  If i had printed at grade 3 then the water and sky would have been a light-mid grey and the boat black.  By printing at grade 5 however i increased the contrast so the bat stayed black and the sky and water were much lighter.  Once you get more experience in printing you can make decisions like this to change the outcome of your final print.  Throughout this process and even when shooting the photo you should be thinking about how you want that final print to look.  For now though we will choose a middle grade contrast to print at.

  Included in your pack of paper should be a data sheet containing processing information for that particular paper.  Take it out the pack (with the room light off and safelight on) and seal the paper up again.  Go back to room light and look at the sheet (these are also normally available from the paper manufacturers website to download as a PDF files).  If you are using multigrade filters and not a colour head you can skip this step and just put the appropriate filtration in the filter carrier beneath your lens.  If you’re using a colour head then keep reading this section.  Beneath the processing information there should be a section about paper grade (see below):



  This (and the following) tables were taken from the Ilford MGIV RC VC datasheet and is used to determine what group of settings you need to use for your enlarger.  Mine is made by LPL which comes under the Kodak group (note - some papers may not ave such tables, you may need to do a little bit of research online if not).  Remember what group your enlarger falls under and look further down the sheet and you should see these two tables:


   
  The first table shows single filter values, the second dual values.  Personally i use dual values most of the time but there are times when single values are better (for varying exposure times).  So, i want to print this negative at grade 3 and i need to use Kodak settings so i need to dial in 23Y and 56M on my colour head.  Look at your head and there should be three dials – yellow, magenta and cyan.  You don’t really use cyan in black and white printing so just focus on the yellow and magenta.  Dial in the settings you have just taken from your datasheet and turn your enlarger on.   



 The image cast onto your easel should have changed colour from white to a mix of yellow and magenta.  If it hasn’t look at your head – most colour enlargers have a switch which lifts the filters away from the light source.  Make sure that the switch is down therefore putting the filters in between the light source and the negative.  Stop your lens down to 2 stops away from max.  My 80mm lens goes to f22 so i tend to print at f11 (sometimes f16 if i need a longer exposure time).  Now you are ready to...
 
Step 4 – Make a test strip

  Make sure your room light is off, your enlarger light is off and your safelight is on.  The only source of light in your room should be your safelight (which you should situate at least 1m away from anywhere your paper is going to be to avoid fogging).  Open your paper and remove a sheet.  Place it emulsion side up beneath the blades of your easel.  The emulsion side on RC paper curves away from itself whereas on FB paper it curls towards itself.  Think of it as "n" and "u" - if you're using RC paper then when the paper is the right way up it will be "n" shaped, for FB paper it will be "u" shaped.  If you are using glossy paper then the emulsion side should be pretty obvious at it will shine, satin and matte finished will be a little trickier.  Make sure the paper is aligned and flat in the easel.  Set your exposure time on your enlarger timer to 26 seconds and get a piece of card larger than your print.  Cover the majority of your paper in the easel with this card but leave a few centimetres free.  Now, what’s going to happen is that once we set the enlarger running we will retract the card by a few centimetres every 2 seconds until the countdown reaches zero and the enlarger stops exposing.



  Set the enlarger running and watch the timer count down.  Every 2 seconds move the card back by a few centimetres and keep going until the enlarger stops exposing.  If you have judged it well the last 2 seconds of exposure should be towards the far end of the paper, thus giving you good exposure coverage across the whole print.  

  Remove your paper from your easel and go to your developing tray (which should be away from any paper storage and your enlarger so as to avoid splashing).  Grab a stopwatch/wristwatch (NOT backlit) and as you slide the paper into the developer start it running.  Rock the tray immediately to ensure that the chemical covers the whole print.  For this paper/developer combination i need to develop for 1 minute at 20oC (paper developing just runs to completion - it doesn't matter if you leave the print in for a few minutes, once the print has reached maximum developing it stops).  Ensure that fresh developer keeps moving over the paper by gently rocking the tray back and forth for the duration of the minute.  An image should start to appear at around 15 to 20 seconds (in fresh developer) and keep developing.  Once you reach 1 minute (developing time will increase if the temperature is lower) remove the paper from the developer using tongs and let it drain for 10 seconds.  Then place it into the stop bath for 10 seconds and rock the tray, drain it for 10 seconds and then fix for 30 seconds (these times will vary depending on what chemicals and papers you use – consult the data sheets that come with your equipment and it will tell you what times to use).  After fixing place the print in a tray of water, or if you’re lucky enough to have a sink in your darkroom place it straight into a bath of running water.  For RC papers washing in running water for around 5 minutes is fine, for FB papers an hour is recommended (if you wash with a hypo clearing agent then this time is halved).  Water doesn’t have to be gushing out of the tap, a gentle trickle is fine.  If you wash insufficiently then it is possible that as time goes by your print will turn brown due to fixer which was not removed by the wash  Personally i have to run out of my darkroom to the bathroom and leave my print washing in the sink whilst i occupy myself elsewhere for a few minutes.  Before you go running out of your darkroom however, make sure your package of paper is sealed and packed away before you turn on your room light or you could ruin your whole box of paper. 
 
  You should now have a print with varying exposures over it that looks something like this:


  This is a test sheet showing various exposures from 0 seconds to 26 seconds.  You may have heard the term test strip before - test strips are exactly the same but instead of using a whole sheet you trim a strip off the edge of your paper and expose that as above.  This works out well for people who shoot 6x6 as you can trim and inch or two off the same sheet you are going to be printing on to make the test strip, thus saving on paper.  For now, though, as this is your first print its best to use a whole sheet so you can get an idea of how the whole print looks at different exposures.  As your experience grows you can go to test strips if you choose to.
 
  Now what you need to do (preferably when the test sheet is dry) is analyse which exposure is best to your eye.  Look at the whole print and find which exposure gives you the best combination of shadow and highlight detail with good contrast throughout.  Personally i like my prints to be slightly on the darker side so i for this print i chose the 26 second exposure.  If you don't think any of the exposures are long enough try a test strip from 60 to 30 seconds, or stop your lens down to reduce the amount of light hitting the paper.

  Once you have decided on an exposure time turn the room light off and safelight on and repeat the above steps but with a straight print at the exposure time you have chosen (in my case 26 seconds).  Develop, stop, fix and wash as before and then leave your print to dry, either hung up or on a rack.   

Here’s my print at 26 seconds exposure:

 
  Once dry really look at your print – are you happy with it?  Is it too light/dark, is the contrast too high/low?  To darken simply choose a longer exposure or use a shorter exposure to lighten.  Change the contrast using filtration and see how that effects the print.  
 
  It is entirely up to you how your final print will look.  We have only scratched the surface of printing in this tutorial (we'll go into more detail in the upcoming parts of my printing guide).  There are likely areas of your print that are still too light or dark even though you have a generally good exposure overall.  In part IV of my printing tutorials we will discuss fine tuning a print using dodging and burning.  Part III, however, wil deal with an alternative printing method - Split Grade Printing.  Until then feel free to ask any questions and most of all - happy printing!